So, you just got your hands on the Siam Pleated Ceiling Light—great choice! It’s got that high-end, textured look that totally transforms a room. Now comes the part most people dread: actually hanging it.
Don’t worry! Whether you’re a seasoned DIYer or this is your first time touching a screwdriver, we’ve got your back. Follow this guide to get your space glowing in about 30 minutes.
🛠 Tools You’ll Need
Before you climb the ladder, let’s make sure you have the basics ready:
-
Phillips Head Screwdriver
-
Wrench (to tighten those internal nuts)
-
Non-contact Voltage Tester (Highly recommended!)
-
3x E26/E27 LED Bulbs (We suggest 2700K Warm White for the best vibes)
⚠️ Step 0: The "Don't Get Zapped" Rule
Before we do anything, let’s talk safety. Go to your breaker box and flip the switch for the room you're working in.
Pro Tip: Don’t just trust the wall switch! Use a voltage tester on the wires in the ceiling to make sure they are actually "dead." Safety isn't just a suggestion—it's how we keep the DIY fun and injury-free.
Step 1: Prep the Goods
First things first: Clear off a table or lay down a towel so you don't scratch that beautiful pleated shade.
-
Pro Move: Screw in your three bulbs now, while the fixture is still sitting on the table. It’s way easier than trying to do it while balancing on a ladder later!
-
The Downrod: Thread your wires through the center rod and screw it into the base of the fixture. Make sure it's snug—this rod supports the whole look.
Step 2: Get the Canopy Ready
The "Canopy" is the white cup that hides all the messy wires against the ceiling.
-
Remove the Bracket: Unscrew the side screws from the canopy to release the metal mounting bracket. You'll attach this bracket to your ceiling's junction box in a moment.
-
Lock it Down: Slide the canopy over the rod. Use the provided washers and nuts, and give them a quick twist with your wrench. You want zero "wobble" here.
Step 3: Mastering the Wiring (The Easy Way)
If wiring makes you nervous, take a breath. We’ve included lever-style connectors (those little grey clips), which are a total game-changer. No messy wire twisting required!
The US Color Code Cheat Sheet:
-
Black to Black: This is your Hot wire.
-
Blue/White to White: This is your Neutral wire.
-
Copper/Green: This is your Ground. Wrap it around the green screw on your ceiling bracket and tighten it up.
How to use the clips: Just flip the lever up, poke the stripped wire in (about 1/2 inch of copper showing), and snap it shut. Give it a gentle tug—if the wire stays put, you’re golden!
Step 4: The Final Mount
-
Secure the Bracket: Screw that metal bracket into your ceiling's junction box.
-
Tuck the Wires: Carefully fold the wires into the box. Important: Make sure no wires are being "pinched" between the canopy and the ceiling.
-
Fasten the Canopy: Slide the canopy up and put those side screws back in. Tighten them until the fixture sits flush against the ceiling.
🎉 Flip the Switch!
Head back to the breaker, turn the power on, and hit the wall switch. Boom. Instant mood upgrade.
Maintenance Tip: Since that shade is fabric, just give it a quick once-over with a feather duster once a month to keep it looking fresh. Skip the wet sprays and chemical cleaners!
🎥 Prefer a Walkthrough? We’ve Got You!
If you’re more of a visual learner, don’t sweat it. We’ve filmed a complete, step-by-step installation video to show you exactly how it’s done—from unboxing to that final "Aha!" moment when the lights come on.
[Watch the Full Installation Video Here]
Got a photo of your new setup? Tag us @Mooijane—we’d love to see how you styled it!